Pai Air Products

1. Carbon Dioxide - Used for less invasive surgeries.Carbon dioxide is also used as a refrigerant.It is used as a fire extinguisher.It is used in promoting the growth of plants in greenhouses.It is used in carbonated beverages, soft drinks, and beers to make them fizzy.Large quantities of solid carbon dioxide ( in the form of dry ice) are used in large-scale refrigeration.It is one of the parts of medical gases because it promotes exhalation.The Carbon dioxide released by baking powder or yeast that makes cake batter rise is the best example of the use of carbon dioxide in everyday life.

Argon is also used as a preservative for such products as varnish, polyurethane, and paint, by displacing air to prepare a container for storage.

Helium gas is an alternative to carbon dioxide surgeons are exploring to insufflate a patient's abdomen undergoing laparoscopic abdominal procedures.

It is a gas that can help prevent respiratory acidosis—a condition that can occur when the lungs cannot remove all of the carbon dioxides the body produces.  

Helium gas, when combined with oxygen, can also be to aid the treatment of asthma, emphysema, and other respiratory conditions. 

Liquid argon is a cryogenic liquid. Cryogenic liquids are liquefied gases that have a normal boiling point below –130°F (–90°C). Liquid argon has a boiling point of –303°F (–186°C). The temperature difference between the product and the surrounding environment, even in winter, is substantial. Keeping this surrounding heat from the product requires special equipment to store and handle cryogenic liquids.

A typical system consists of the following components: a cryogenic storage tank, one or more vaporizers, a pressure control system, and all of the piping required for fill, vaporization. The cryogenic tank is constructed, in principle, like a vacuum bottle. It is designed to keep heat away from the liquid that is contained in the inner vessel. Vaporizers convert the liquid argon to its gaseous state. A pressure control manifold controls the pressure at which the gas is fed to the process.